Equipment

Download ASME Bio Process Equipment (BPE) 2005 by Amaryqueen Societon of Mechanicanol Engibeers PDF

By Amaryqueen Societon of Mechanicanol Engibeers

Show description

Read or Download ASME Bio Process Equipment (BPE) 2005 PDF

Similar equipment books

Home Cinema Choice [UK] (February 2014)

Domestic Cinema selection is the UKs best-selling domestic cinema fans journal. each factor beneficial properties information and stories of the most recent domestic cinema gear, from amplifiers, receivers, processors and gear amps, to DVD recorders, audio system, projectors and flat panel TVs

Home Cinema Choice (December 2015)

Domestic Cinema selection is the UK's best-selling domestic cinema fanatics journal. each factor positive aspects information and studies of the newest domestic cinema apparatus, from amplifiers, receivers, processors and gear amps, to DVD recorders, audio system, projectors and flat panel TVs.

The New Darkroom Handbook. A Complete Guide to the Best Design, Construction, and Equipment

The Darkroom instruction manual, moment version, is a very revised and up-to-date model of a vintage consultant to the simplest layout, development, and kit to take advantage of while constructing a darkroom. This ebook positive aspects principles and money-saving the way to placed a darkroom virtually anyplace in your house or condominium. It takes you inside of darkrooms of photographers all over the world together with these of recognized photographers reminiscent of, Harry Callahan, Aaron Siskind, Berenice Abbott, and W.

Additional resources for ASME Bio Process Equipment (BPE) 2005

Sample text

1 General (a) Liquid filled elements in measuring devices should not contain materials that are harmful to the product. (b) Gage siphons (pigtails) should not be used. The number of isolation valves should be minimized. ). (d) Measurement elements should be designed in a way that a failure will not cause contamination hazards to the process and environment. (e) The internal volume of the instrument’s sensing element should be minimized. (f) Instruments should have integral hygienic fittings. Threaded ferrules are not acceptable to convert standard instrumentation to hygienic standards.

SD-16. 2 In-Tank Couplings (See Fig. SD-21) (a) Use of in-tank shaft couplings shall be by end user consent. (b) Use of in-tank couplings shall be restricted to locations above the liquid level. (c) In-tank couplings shall be of an acceptable hygienic design (see Fig. SD-21). (d) O-rings rather than flat gaskets should be used, if possible. 1 General (a) Agitators and mixers with their associated components shall be accessible to the cleaning fluids as specified by the end user. (b) For cleaning purposes the annular space shall have the target value of L/A ratio of 2:1 or a minimum of 1 in.

Nominal Branch Size, in. 22 ⁄4 ⁄8 1 ⁄2 3 ⁄4 3 Consideration should be given, in the design of the support, for ease of setting the correct tubing drain or slope angle. Materials of construction shall be corrosion resistant and compatible with chemical and physical performance and designed for steam service. solution to fill a circuit, and eliminate excessive piping and fittings. 10 Cross contamination of product streams shall be physically prevented. Methods of separation used in industry are: (a) removable spool piece; (b) U-bend transfer panel; (c) double block-and-bleed valve system (see Fig.

Download PDF sample

Rated 4.67 of 5 – based on 22 votes